Speakers - HP 242 G1 Maintenance And Service Manual

Speakers

Description
Speakers (include left and right speakers and cables)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. WLAN module (see
c. Solid-state drive (see
d. Memory module service cover (see
e. Optical drive (see
f. Keyboard (see
g. Top cover (see
h. Fan (see
i. System board (see
Remove the speakers:
1. Release the front speaker cables (1) from the clips built into the base enclosure.
70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Hard drive on page
WLAN module on page
mSATA drive on page
Optical drive on page
Keyboard on page
Top cover on page
Fan on page 57)
System board on page
33) and then remove the following components:
34)
37)
39)
Memory module on page
42)
47)
50)
61)
Spare part number
718443-001
40)