HP 242 G1 Maintenance And Service Manual page 78

f. Keyboard (see
g. Top cover (see
h. Fan (see Fan on page
i. System board (see
j. Heat sink (see
Remove the processor:
1. Turn the system board upside down, with the front toward you.
2. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2), until you hear a click.
3. Lift the processor (3) straight up, and remove it.
NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Keyboard on page 47)
Top cover on page 50)
57)
System board on page
Heat sink on page 65)
61)
Component replacement procedures 69