System Board - HP 242 G1 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
System board for use in models without Windows 8 and with 2-GB of discrete graphics memory
System board for use in models with Windows 8 Standard and with 2-GB of discrete graphics
memory
System board for use in models with Windows 8 Professional and with 2-GB of discrete graphics
memory
System board for use in models without Windows 8 and with 1-GB of discrete graphics memory
System board for use in models with Windows 8 Standard and with 1-GB of discrete graphics
memory
System board for use in models with Windows 8 Professional and with 1-GB of discrete graphics
memory
System board for use in models without Windows 8 and with UMA graphics
System board for use in models with Windows 8 Standard and with UMA graphics
System board for use in models with Windows 8 Professional and with UMA graphics
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. WLAN module (see
c. Solid-state drive (see
d. Memory module service cover (see
e. Optical drive (see
f. Keyboard (see
g. Top cover (see
h. Fan (see
Battery on page
Hard drive on page
WLAN module on page
mSATA drive on page
Optical drive on page
Keyboard on page
Top cover on page
Fan on page 57)
33) and then remove the following components:
34)
37)
39)
Memory module on page
42)
47)
50)
Component replacement procedures
Spare part number
725243-001
725243-501
725243-601
725242-001
725242-501
725242-601
725241-001
725241-501
725241-601
40)
61