Fan - HP 242 G1 Maintenance And Service Manual

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Memory module service cover (see
c. Optical drive (see
d. Keyboard (see
e. Top cover (see
Remove the fan:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
3. Disconnect the fan cable from the system board.
Battery on page 33) and then remove the following components:
Hard drive on page 34)
Memory module on page
Optical drive on page
Keyboard on page 47)
Top cover on page 50)
40)
42)
Component replacement procedures
Spare part number
718430-001
57