Battery - HP 242 G1 Maintenance And Service Manual

Battery

Description
4-cell, 41-Wh, 2.80-Ah, Li-ion battery
4-cell, 48-Wh, 3.20-Ah, Li-ion battery
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the battery:
WARNING!
the computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
cause loss of information. To prevent loss of information, save your work or shut down the computer
through Windows before removing the battery.
1. Turn the computer upside down, with the rear toward you.
2. Place the computer on a flat surface, free of obstacles, with ample work space.
3. Slide the battery lock latch (1), and then slide the battery release latch (2) to release the battery.
4. Remove the battery (3) from the computer.
Reverse this procedure to install the battery.
To reduce potential safety issues, use only the user-replaceable battery provided with
Removing a user-replaceable battery that is the sole power source for the computer can
Spare part number
708462-001
724933-001
Component replacement procedures 33