Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures - HP 242 G1 Maintenance And Service Manual

5 Removal and replacement procedures
for Customer Self-Repair parts
NOTE: The Customer Self-Repair program is not available in all locations. Installing a part not
supported by the Customer Self-Repair program may void your warranty. Check your warranty to
determine if Customer Self-Repair is supported in your location.

Component replacement procedures

NOTE: Please read and follow the procedures described here to access and replace Customer
Self-Repair parts successfully.
NOTE: Details about your computer, including model, serial number, product key, and length of
warranty, are on the service tag at the bottom of your computer. See Service tag on page 16 for
details.
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are as many as 6 screws that must be removed, replaced, and/or loosened when servicing
Customer Self-Repair parts. Make special note of each screw size and location during removal and
replacement.
32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts