Buttons And Fingerprint Reader (Select Models Only) - HP 242 G1 Maintenance And Service Manual

Buttons and fingerprint reader (select models only)

Component
(1)
(2)
8 Chapter 2 External component identification
Power button
Fingerprint reader (select models only)
Description
●
When the computer is off, press the button to turn on
the computer.
●
When the computer is in the Sleep state, press the
button briefly to exit Sleep.
●
When the computer is in Hibernation, press the button
briefly to exit Hibernation.
CAUTION: Pressing and holding down the power button
will result in the loss of unsaved information.
If the computer has stopped responding and Windows
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the computer.
NOTE: For select Windows 8 models, the Intel® Rapid
Start Technology feature is enabled at the factory. Rapid
Start Technology allows your computer to resume quickly
from inactivity.
To learn more about your power settings in Windows 8, see
your power options. From the Start screen, type power,
select Settings, and then select Power Options.
To learn more about your power settings in Windows 7,
select Start > Control Panel > System and Security >
Power Options.
Allows a fingerprint logon to Windows, instead of a password
logon.