Setting Additional User Functions; How To Set The Additional User Functions - Samsung MWR-WE10N Manual

SETTING ADDITIONAL USER FUNCTIONS

How to Set the Additional User Functions

Main menu Sub-menu
1. If you want to set the detailed settings, press the User Set button.
You will enter the User Set mode, and the [Main Menu] will be displayed.

2. Refer to the Wired Remote Controller's User Set list on the next page to select the desired menu.
Using the [∧]/[∨] buttons, select a main menu number and press the [＞] button to enter the sub-menu setting

screen.
Using the [∧]/[∨] buttons, select a sub-menu number and press the [＞] button to enter the data setting screen.

Once you have entered the setting screen, the current setting will be displayed.

Refer to the chart for data setting.

Using the [∧]/[∨] buttons, change the settings and press the [＞] button to move to the next setting.

Press the Set button to save the setting and exit to the sub-menu setting screen.

Press the Esc button to exit to general mode.

• While setting the data, you can use the [＞]/[＜] buttons to set the range of SEG used.
• While configuring the setting, press the Esc button to exit to the sub-menu setting screen
without saving the setting.
28
NASA_Wired Remote Control_MWR-WE10N_EN_IB_03732A(1).indd 28
SEG Used
1 2 3 4 5 6
2013-02-01 오후 6:23:31