Table of Contents
Advertisement
Quick Links
Please Contact Moen First
For Installation Help, Missing or
Replacement Parts
(USA)
1-800-BUY-MOEN (1-800-289-6636)
Mon - Fri 8:00 AM to 7:00 PM, Eastern
Sat. 9:00 AM to 3:00 PM Eastern
WWW.MOEN.COM
(Canada)
1-800-465-6130
Mon - Fri 7:30 AM to 7:00 PM, Eastern
WWW.MOEN.CA
Por favor, contáctese primero con Moen
Para obtener ayuda de instalación, piezas
faltantes o de recambio
01-800-718-4345
Lunes a viernes de 8:00 a 20:00 hs.
(Costa Este)
Sáb. 8:00 a 18:30 hs. (Costa Este)
WWW.MOEN.MX
Veuillez d'abord contacter Moen
en cas de problèmes avec l'installation, ou pour
obtenir toute pièce manquante ou de rechange
1-800-465-6130
Du lundi au vendredi:
de 7 h 30 à 19 h, HE
WWW.MOEN.CA
HELPFUL TOOLS
For safety and ease of faucet replacement,
Moen recommends the use of these help-
ful tools.
Installation Guide
Guía de Instalación
Guide d'installation
SINGLE HANDLE KITCHEN FAUCET
Model 7065 Series
MEZCLADORA MONOMANDO
PARA COCINA
Modelo Serie 7065
ROBINET DE CUISINE À POIGNÉE UNIQUE
Modèle de série 7065
HERRAMIENTAS ÚTILES
Para que el cambio de la llave sea fácil y
seguro, Moen le recomienda usar estas
útiles herramientas.
1
INS1226F - 6/14
OUTILS UTILES
Par mesure de sécurité et pour faciliter
l'installation, Moen suggère l'utilisation des
outils suivants.
Advertisement
Table of Contents
Related Manuals for Moen 7065 Series
Summary of Contents for Moen 7065 Series
- Page 1 For safety and ease of faucet replacement, Para que el cambio de la llave sea fácil y Par mesure de sécurité et pour faciliter Moen recommends the use of these help- seguro, Moen le recomienda usar estas l’installation, Moen suggère l’utilisation des ful tools.
-
Page 2: Parts List
Parts List A. Spout Body I. Side Spray B. Handle Escutcheon J. Hose Guide C. Quick Connect Hose K. Side Spray Gasket D. Diverter Tee L. Hose Guide Nut E. Support Bracket M. Mounting Bracket F. Mounting Washer N. Handle Assembly G. - Page 3 INS1226F - 6/14 Option/Opción/Option <1/2" (13mm) Insert Spout Body (A) into sink opening. Install Mounting Washer (F) and Spout Mounting Nut (G) to Spout Body (A). For decks less than 1/2", Support Bracket (E) may also be used as shown. Inserte el cuerpo del surtidor (A) en la abertura en el fregadero.
- Page 4 Thin deck / Plateforme mince / Cubierta fina <1/2" (<13mm) Insert Handle Assembly (H) through Handle Escutcheon (B) and into sink opening. For thin decks, install Mounting Bracket (M) with open end up as shown. Secure Bracket with Handle Assembly Mounting Nut (N).Tighten by hand. Inserte el conjunto del monomando (H) a través del chapetón del monomando (B) y dentro de la abertura en el fregadero.
- Page 5 INS1226F - 6/14 To install without sidespray, go to To install sidespray, go to Para instalar sin rocío lateral, vaya a Para instalar rocío lateral, vaya a Pour une installation sans rince-légumes latéral, aller à Pour installer le rince-légumes latéral, aller à Install Quick Connect Hose (C) onto Spout Body (A) and onto stem of Handle Assembly (H).
- Page 6 Insert Hose Guide (J) through Side Spray Gasket (K) and into sink opening. From underneath, Insert Side Spray (I) through Hose Guide (J) until Side Spray is fully seated. secure with Hose Guide Nut (L). Tighten by hand. Inserte el rociador lateral (I) a través de la guía de la manguera (J) hasta que el rociador lateral Inserte la guía de la manguera (J) a través del empaque del rociador lateral (K) y dentro de la asiente por completo.
- Page 7 INS1226F - 6/14 Cold Frio Froid Caliente Chaud 1. Install Diverter Tee (D) to Spout Body (A). 1. Connect Handle Assemply (H) supply lines to Hot and Cold Shut offs. 2. Push in as far as possible until a “click” is heard. Tug downward to test engagement. 2.
- Page 8 Il suffit d’écrire defect and include proof of purchase and your name, estado a otro o de una provincia o nación a otra. Moen lo à Moen inc. à l’adresse indiquée ci-dessous, pour expli- address, area code and telephone number.