Table of Contents
Advertisement
NOTE:
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
WLAN module (see
●
●
Memory module (see
To remove the system board:
1.
Remove the display cables by lifting the black and silver tape that secures the cable to the fan (1).
2.
Lift the tape that covers the cable in the space between the two memory modules (2).
3.
Lift the pieces of tape along the side of the system board (3).
4.
Separate the antenna cable from the display cable (4).
5.
Disconnect the display cable from the system board (5), and then remove the cables from their
remaining routing paths.
WLAN module on page
36)
Memory module on page
38)
Component replacement procedures
49
Hide quick links:
Advertisement
Table of Contents
