Emmc Module - HP 14-an0XX Maintenance And Service Manual

eMMC module

Description
eMMC drive, 64 GB, M.2 (includes eMMC board, bracket, cable, foam, and screws)
eMMC drive, 32 GB, M.2 (includes eMMC board, bracket, cable, foam, and screws)
Before removing the eMMC module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the eMMC module:
1. Disconnect the cable from the system board (1).
2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the module to the computer
3. Lift the module from the system board (3).
34 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 26).
Optical drive on page
Bottom cover on page
27).
30).
Spare part number
903803-001
861964-001