Accu-Chek COMPACT PLUS User Manual page 187

Error message Meaning
The measuring window is dirty.
Press the Test button to turn the meter
off. Clean the measuring window (see
Chapter 8.1) and repeat the test with a
new test strip.
A test strip is stuck in the meter.
Hold the meter upright so the test strip
is pointing downwards. Press the Test
button to turn the meter off and allow
the test strip to drop out. If the test
strip does not drop out, remove it
manually, even if you feel some
resistance.
12
The test strip drew up too little blood
or control solution.
Turn the meter off and then on again
by pressing the Test button. Repeat
the test with a new test strip and a
larger amount of blood or control
solution.
187
Symbols, error messages and troubleshooting