Possible Causes Of Error During The Performance Of Control Tests - Accu-Chek COMPACT PLUS User Manual

You can dispose of empty or only partly used bottles of control
i
solution together with your regular household waste.
Please refer also to the notes in Chapters 4.3 and 4.4.
7.3 Possible causes of error during the performance of control
tests
If the result is outside the stated concentration range, perform a second
control test. If the result of this second check is outside the
concentration range as well, please check the following points:
Did you perform the control test as described above?
Did you wipe the tip of the dropper before you applied control
solution to the surface of the washable object?
Did you use a suspended drop of control solution?
Was there prolonged contact between the control solution and
the washable object?
Did you bend the test strip either before or while you were
drawing up control solution?
Did you wait for the test strip symbol and drop symbol to flash
in the display before drawing up control solution with the test
strip?
Checking your meter
7
yes
yes
yes
no
no
yes
137