Page 1
42in. Sweeper Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 49172 06082015 SAVE THESE INSTRUCTIONS...
Page 2
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, the warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 6 Assembly ............................... 7 Operating Instructions ........................11 Maintenance ............................11 Parts Diagram ............................12 Parts List .............................. 16 Replacement Parts ..........................17 Limited Warranty ..........................
Intended Use This 42” Sweeper allows dumping from the driver’s seat and folds up for compact storage. Technical Specifications Property Specification 42” Working Width Bag Capacity 13 cu. ft. 10.5” Wheel Size Sweep Ratio Important Safety Information Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
Page 5
PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. ...
Specific Operation Warnings CRUSHING HAZARD Implement is heavy. Be careful when moving or lifting as hands, finders, feet, and other body parts can be crushed. DO NOT exceed this implement’s maximum speed of 5 MPH. Exceeding this speed may result in loss of control during transport or braking.
Assembly STEP 1: Move Tow Bar into Position Parts Needed: Qty 2 – Bolt 3/8” x 2” (Q4) Qty 2 – Lock Nut 3/8” (Q5) Qty 1 – Flat Washer 3/8” (Q6) Attach Bolt (Q4), Lock Nut (Q5) and Flat Washer (Q6) to the middle of the Tow Bar. Wait to tighten connections.
Page 8
ASSEMBLING THE SWEEPER BAG STEP 3: INSERT MAIN HOPPER TUBE – TOP SIDE Parts Needed: Qty 1 – Hopper Bag (67) Qty 1 – Main Hopper Tube (66) Insert one Main Hopper Tube (66) through the loops in top of Hopper Bag (67).
Page 9
Inside top of Hopper Bag STEP 6: ATTACH REAR BAG SUPPORT BRACKET Parts Needed: Bolt Qty 1 – Rear Bag Support Bracket (B4 & B5) Qty 2 – Carriage Bolt 1/4" X 1-1/2” (B2) Qty 2 – Carriage Bolt 1/4” X 5/8” (19-2) Rear Bag Qty 2 –...
Page 10
STEP 9: INSERT FRONT HOPPER SECURING BAR Parts Needed: Qty 1 – Front Hopper Metal Bar (74) Qty 2 – Clevis Pin (61) Qty 2 – Hair Cotter Pin (22) Insert the Front Hopper Metal Bar (74) into the stitched sleeve on the front edge of the Hopper Bag bottom.
Operating Instructions For best sweeping results, do not tow over 3 to 5 mph. Use hitch spacers to help keep hitch level to ground. ALWAYS try to keep sweeper level. BRUSH HEIGHT ADJUSTMENT To adjust your sweeper brushes to the best operating height, loosen the adjustment knob and push down on the height adjustment lever to raise the brush.
Parts Diagram Main Sweeper Parts Part Part REF# Description REF# Description listing listing Main sweeper body Front hopper metal bar Hopper bag Bag mount tube Front lower hopper tube Lever mount bracket right Front lower hopper tube Tow bar left Front upper hopper tube Quick lever handle right...
Page 13
Hardware Parts Listing REF # Part # Description Qty. REF # Part # Description Qty. Hex Bolt, 3/8” X 3” Hitch Spacer Tube Hex Bolt, 5/16” X 2” Hair Cotter Pin (Ø3 Thickness) Hex Bolt, 5/16” X 1-1/2” Hair Cotter Pin (Ø2 Thickness) Clevis Pin P, Ø9.5 ×...
Part No. Description Qty. Part No. Description Qty. Hex Bolt, 1/4" x 1-1/2" Pull Rod End Plate, Left Side Clevis Pin Carriage Bolt 1/4” x 1-1/2” Brush Shaft Bushing Big Flat Washer Connecting Bracket, Rear Support Dust Cover Retainer U Plate, Rear Support Hex Bolt, 3/8"...
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 19
Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.com Made in China Page 19 of 19...