Audio Board - HP Compaq Presario CQ61 Maintenance And Service Manual

Audio board

Description
Audio board
✎
The audio board spare part kit does not include a cable. The audio board cable is included in
the Cable Kit, spare part number 531211-001.
Before removing the audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Wireless module compartment cover (see
b. Hard drive cover (see
c. Optical drive (see
d. Keyboard (see
e. Keyboard cover (see
f. Display assembly (see
g. Top cover (see
Remove the audio board:
1. Release the LIF connector 1 to which the audio board cable is attached, and then disconnect the cable 2 from
the system board.
2. Remove the Phillips PM2.5×6.5 screw 3 that secures the audio board to the base enclosure.
3. Remove the audio board 4.
Reverse this procedure to install an audio board.
Maintenance and Service Guide
Downloaded from LpManual.com Manuals
"Battery" on page 4-7).
"Hard drive" on page
"Optical drive" on page
"Keyboard" on page 4-16).
"Keyboard cover" on page
"Display assembly" on page
"Top cover" on page 4-29).
"WLAN module" on page
4-10). HP recommends removing the hard drive.
4-15).
4-18).
4-21).
Removal and replacement procedures
Spare part number
531208-001
4-8).
4–33