Removal and replacement procedures
Bluetooth module (select models only)
Description
Bluetooth module
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Wireless module compartment cover (see
b. Hard drive cover (see
c. Optical drive (see
d. Keyboard (see
e. Keyboard cover (see
f. Display assembly (see
g. Top cover (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Remove the Bluetooth module 2 from the base enclosure. The Bluetooth module is secured with
double-sided tape.
Reverse this procedure to install the Bluetooth module.
4–32
Downloaded from LpManual.com Manuals
"Battery" on page
4-7).
"Hard drive" on page
"Optical drive" on page
"Keyboard" on page
4-16).
"Keyboard cover" on page
"Display assembly" on page
"Top cover" on page
4-29).
"WLAN module" on page
4-10). HP recommends removing the hard drive.
4-15), recommended.
4-18).
4-21).
Spare part number
537921-001
582757-001
4-8).
Maintenance and Service Guide