Speaker Assembly - HP Compaq Presario CQ61 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly (includes left and right speakers and cables)
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Wireless module compartment cover (see
b. Hard drive cover (see
c. Optical drive (see
d. Keyboard (see
e. Keyboard cover (see
f. Display assembly (see
g. Top cover (see
Remove the speaker assembly:
1. Remove the speaker cables from the clips built into the base enclosure, and then disconnect the cable 1 from
the system board.
2. Remove the speakers 2 from the base enclosure.
Reverse this procedure to install the speaker assembly.
Maintenance and Service Guide
Downloaded from LpManual.com Manuals
"Battery" on page 4-7).
"Hard drive" on page
"Optical drive" on page
"Keyboard" on page 4-16).
"Keyboard cover" on page
"Display assembly" on page
"Top cover" on page 4-29).
"WLAN module" on page
4-10). HP recommends removing the hard drive.
4-15), recommended.
4-18).
4-21).
Removal and replacement procedures
Spare part number
531209-001
4-8).
4–31