Removal and replacement procedures
Keyboard
✎
For a comprehensive list of keyboard spare part numbers, see
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Wireless module compartment cover (see
b. Hard drive cover (see
c. Optical drive (see
Remove the keyboard:
1. Remove the five Phillips PM2.5×6.5 screws that secure the keyboard to the base enclosure. The keyboard
screws are identified by a keyboard icon embossed on the base enclosure.
4–16
Downloaded from LpManual.com Manuals
"Battery" on page
4-7).
"WLAN module" on page
"Hard drive" on page
"Optical drive" on page
4-15), recommended.
"Computer major components" on page
4-8).
4-10). HP recommends removing the hard drive.
3-2.
Maintenance and Service Guide