Wlan Module - HP Compaq Presario CQ61 Maintenance And Service Manual

Removal and replacement procedures

WLAN module

✎
For a comprehensive list of WLAN spare part numbers, see
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the WLAN module:
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized
Ä
for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you
replace the module and then receive a warning message, remove the module to restore computer functionality, and
then contact technical support through Help and Support.
1. Loosen the Phillips PM2.5×5.5 captive screw 1 that secures the wireless module compartment cover to the
base enclosure.
2. Lift the right side 2 of the cover, swing it up and to the left, and then remove the cover 3. The wireless module
compartment cover is included in the Plastics Kit, spare part number 531517-001.
4–8
Downloaded from LpManual.com Manuals
"Battery" on page 4-7).
"Computer major components" on page 3-2.
Maintenance and Service Guide