HP ENVY Maintenance And Service Manual page 62

g. Remove the hinge strip (2).
The hinge strip is available using spare part number 829304-001.
9. If it is necessary to replace the WLAN antenna cables and transceivers:
a. Remove the display bezel.
b. Remove the display panel.
c. Release the two pieces of grounding tape (1) the secure the webcam/microphone module cable to
the display back cover.
d. Detach the WLAN antenna transceivers (2) from the display back cover. (The WLAN antenna
transceivers are attached to the display back cover with double-sided adhesive.)
e. Release the WLAN antenna cables from the clips (3) and routing channel built into the left edge of
the display back cover.
52 Chapter 5 Removal and replacement procedures