HP ENVY Maintenance And Service Manual page 61

a. Remove the display bezel.
b. Remove the display panel.
c. Remove the six Phillips PM2.5×2.7 broad head screws that secure the display hinges to
the display back cover.
d. Release the outside tips of the display hinge cover (1) from the slots built into the display hinges.
e. Remove the display hinges (2).
The display hinges are available using spare part numbers 848176-001 (for use only on computers
with model numbers 13-d100 through 13-d199) and 829303-001 (for use only on computers with
model numbers 13-d000 through 13-d099).
f. If it is necessary to replace the hinge strip, remove the two Phillips PM2.0×2.4 screws (1) that
secure the hinge strip to the display back cover.
Component replacement procedures 51