Security Cable Slot Bracket - HP ENVY Maintenance And Service Manual

5. Remove the fans (5).
6. Remove the fans.
Reverse this procedure to install the fans.

Security cable slot bracket

Description
Security cable slot bracket
Before removing the security cable slot bracket, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the security cable slot bracket:
1. Remove the Phillips PM2.5×4.4 screw (1) that secures the security cable slot bracket to the keyboard/
top cover.
38 Chapter 5 Removal and replacement procedures
Bottom cover on page 26).
Spare part number
829298-001
Battery on page 28).