Table of Contents
Advertisement
13.
If it is necessary to replace the display hinges:
a.
Remove the display bezel.
b.
Remove the display panel.
c.
Remove the following screws that secure the display hinges and display hinge support brackets to
the display enclosure:
(1) Two Phillips PM1.9×2.9 screws that secure the display hinge brackets
(2) Four Phillips PM2.4×3.1 broad head screws that secure the display hinges
(3) Two Phillips PM2.4×3.6 screws that secure the display hinges
Component replacement procedures
47
Advertisement
Table of Contents
