Optical Drive Cable - HP 240 Maintenance And Service Manual

Optical drive cable

Description
Optical drive cable (includes cable bracket)
Before removing the optical drive cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
●
Remove the optical drive cable:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the optical drive cable and cable bracket
to the base enclosure.
2. Remove the cable bracket (2) and cable (3).
Battery on page 56), and then remove the following components:
WLAN module on page
Hard drive on page 70)
Keyboard on page 76)
Top cover on page 79)
Speakers on page 87)
USB board on page 89)
Power connector cable on page
Display assembly on page
System board on page
64)
91)
93)
102)
Component replacement procedures
Spare part number
685084-001
107