HP 355 G2 Maintenance And Service Manual page 78

3.
Disconnect all external devices from the computer.
4.
Remove the Battery (see
a.
Service cover (see
b.
Hard drive (see
c.
Optical drive (see
d.
Keyboard (see
NOTE: When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
Fingerprint reader module (See
●
TouchPad button board (See
●
Card reader board (See
●
Power button board (See
●
Remove the top cover:
1.
Close the computer.
2.
Turn the computer upside down with the front toward you.
3. Remove the two rubber feet (1).
NOTE:
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Service cover on page
Hard drive on page
Optical drive on page
Keyboard on page
Fingerprint reader module on page
TouchPad button board on page
Card reader board on page
Power button board on page
The rubber feet are included in the Rubber Kit, spare part number 746669-001.
52), and then remove the following components:
53)
54)
62)
64)
72)
74)
75)
71)