Installing The Sd Card Provided With The Machine - Ricoh Aficio SP 5200S Operating Instructions Manual

3. Getting Started
another function if "Apply Auto Paper Select (Printer Only)" under [Paper Type: Bypass Tray] in
User Tools is set to [Yes] and "Input Tray" is set to [Auto Tray Select] in the printer driver.
• If the machine is capable of executing multiple functions simultaneously, specify which function
should have priority in "Print Priority". The default is "Display Mode". For details about Print
Priority, see "General Features", Network and System Settings Reference.
• You can specify the output tray where documents are delivered (type 2 only). For details about
Output Tray Settings, see "General Features", Network and System Settings Reference.
• While printing is in progress, scanning a document using another function may take longer than
usual.

Installing the SD Card Provided with the Machine

This section describes how to install the SD card.
• Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside
this machine are high voltage components that are an electric shock hazard and laser
components that could cause blindness. Contact your sales or service representative if any of the
machine's internal components require maintenance, adjustment, or repair.
• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
Note again that exposure to the laser components inside this machine risks blindness.
• Keep SD cards out of reach of children. If a child swallows an SD card, consult a doctor
immediately.
• Do not subject the card to physical shocks.
• Security&Encryption Unit is factory-installed in an upper slot.
The following SD cards are provided with the machine:
• VM Card & App2Me Provider
Allows you to install embedded software architecture applications on the machine.
• Security&Encryption Unit
Allows you to erase or encrypt data that is stored on the hard disk.
86