Health O Meter 500KL User Instructions page 20

QUICK START / OPERATING INSTRUCTIONS (CONT)
Zero Function
When using this scale, the weight of an object, can be zeroed out allowing additional weight to
be added and displayed. The zero function automatically performs this subtraction.
Note: Ensure there are no objects on the scale platform.
Zero (Push Button)
1. With all weight off the scale, press the ON/OFF button to turn on the scale.
2. Wait until the "0.0" LB appears on the display.
3. Set the unit (LB or KG).
3. Place the object on the scale. The display will show a value for the object's weight.
4. Press the ZERO button. The word "TARE" will appear on the display, followed by "0.0" LB or
"0.0" KG.
5. Place additional item (object) on the platform and only the weight of the additional item will be
displayed.
6. When you remove the item from the platform "under" will be temporally displayed and then
the displayed will return to "0.0" LB
Reading Height Rod Measurements
Figure 14
20
Measure here for heights
less than 48.5"
Measure here for heights
greater than 48.5"