TP-Link TL-PS110U Quick Installation Manual
Fast ethernet print server
Hide thumbs
Also See for TL-PS110U:
- User manual (58 pages) ,
- Installation manual (10 pages) ,
- Quick installation manual (16 pages)
Related Manuals for TP-Link TL-PS110U
Summary of Contents for TP-Link TL-PS110U
-
Page 1: Quick Installation Guide
Quick Installation Guide TL-PS110U Single USB2.0 Port Fast Ethernet Print Server TL-PS110P Single Parellel Port Fast Ethernet Print Server Rev:1.0.2 7106500729... -
Page 2: Hardware Installation
A Before you start, you should prepare the following items: One Windows-based PC with print server setup CD One printer One printer cable One HUB B Wired Network with Print Server: Print Server Printer Computer Computer Computer C Hardware Installation: Turn off the printer’s power. - Page 3 Insert the setup CD into your CD-drive. The auto-run program will be started. Select the model of your print sever to begin the setup. For example,if your print sever model is TL-PS110P,please select TL-PS110P. Choose Setup Wizard to install the print server and configure the connected printer.
- Page 4 Click Next, the wizard will automatically discover the print server. From the Select A Print Server screen, select the print server that you want to configure and click Next. On the Change Settings screen, select No or Yes:...
- Page 5 Click No if you want the print server to keep using the default IP address and keep the default settings, and then click Next. IP address: 192.168.0.10 Subnet Mask: 255.255.255.0 Click Yes if you want change IP address to the print server, and then click Next. Note: The IP address of print server must be within the same subnet as your network adapter.
- Page 6 Click Add New Printer to launch Windows Add Printer Wizard. 10 Click Next and select Local Printer, make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then click Next.
- Page 7 11 Make sure the Use the following port radio-button is clicked and select LPT1: (Recommended Printer Port) from the pull-down list. Then click Next. 12 Select Manufacturer and Printer from the lists of printer’s driver. Then click Next.
- Page 8 13 If you already have the printer’s driver installed, you will be asked whether to keep it or to replace it. Click Next. Supply a name for the printer and choose whether you want to make it your default printer. Then click Next. 14 Then, choose whether you want to share the printer with other network users, print a test page (please select No.), etc.
- Page 9 16 From Windows system, go to start -> Printers and Faxes and highlight your newly installed printer. 17 Right-click, select Properties -> Ports and verify that the print server’s port appears.
- Page 10 18 Go to General; click Print Test Page to verify the configuration. 19 Done. Note: If you wish to install more print servers, start setup wizard from your Windows Start menu: start -> All Programs -> Network Print Server -> PSWizard and repeat the installation procedure.
- Page 11 Appendix Configuring the PCs In this section, we’ll introduce how to configure the TCP/IP correctly in Windows 2000/XP and Vista. For Windows 2000/XP Users. Right click MY Network Places and choose Properties. Right click the icon that showed below, select Properties on the prompt page. In the prompt page showed below, double click on the...
- Page 12 Internet Protocol (TCP/IP). The following TCP/IP Properties window will display. Select Use the following IP address radio button. And the following items are available. Type IP address is 192.168.0.x (x is from 2 to 254), Subnet mask is 255.255.255.0 and Default gateway is 192.168.0.1.Then click OK.
- Page 13 For Windows Vista Users On the Windows taskbar, click the Start, then select Control Panel; Select Classic View on the left side then double-click Networking and Sharing center;...
- Page 14 Click Manage network connections on the left side. Right click the icon that showed below, select Properties on the prompt page. In the prompt page showed below, double click on the Internet Protocol Version 4(TCP/IPv4).
- Page 15 The following TCP/IPv4 Properties window will display. Select Use the following IP address radio button. And the following items are available. Type IP address is 192.168.0.x (x is from 2 to 254), Subnet mask is 255.255.255.0 and Default gateway is 192.168.0.1.Then click OK.
- Page 16 Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.