Additional Information - Dyson 360 Eye How To Use Manual

Additional information

PLEASE READ THE 'IMPORTANT SAFETY INSTRUCTIONS' IN
THIS DYSON OPERATING MANUAL BEFORE PROCEEDING.
PREPARING TO CLEAN
• To ensure the best performance from your robot, it is
important to prepare the cleaning surface, removing
obstacles such as:
– Objects that might become entangled in moving parts:
Thin cables, such as headphone or charger cables; shoe
laces; items of clothing, curtains or fabric; loose ends of
rugs such as tassels.
– Hard to vacuum surfaces: thin, loose rugs such as bath
mats or animal hides; very deep pile rugs.
– Objects that might cause damage or blockage if sucked
up: magazines and papers; liquid spills; sharp items.
– Objects that obscure drops: bags or shoes near a drop.
– Objects within 10cm of steps.
• To avoid damage to possessions, please remove any fragile
items such as vases on pedestals from the cleaning surface.
• Ensure children and pets are kept away from the
cleaning area.
• Tell people in the household when the robot is operating.
• The robot's navigation system is not designed to operate in
complete darkness, please ensure adequate lighting across
all cleaning areas, including those already cleaned. For
example, leave the lights on if cleaning at night.
LOOKING AFTER YOUR DYSON APPLIANCE
• Store the robot indoors. Do not use or store it below
3°C (37.4°F). Ensure the robot is at room temperature
before operating.
• Clean the robot only with a dry cloth. Do not use any
lubricants, cleaning agents, polishes or air fresheners on
any part of the robot.
Check all sensor covers and the navigational camera for dirt,
fingerprints or smears. Wipe with a soft, dry, microfibre cloth
to clean. Do not use cleaning fluids, liquids or sprays of any
kind.
• Check the brush bar and tracks regularly and clear away
any debris (such as hair). Debris left on the brush bar and
tracks may cause damage to flooring when vacuuming.
• Place the robot on a soft surface if it has to be turned over
when looking for blockages, etc. This will help to avoid
damaging the camera and sensors.
VACUUMING
• Before vacuuming your flooring, rugs and carpets, check
the manufacturer's recommended cleaning instructions.
• Before vacuuming highly polished floors, such as wood
or lino, first check that the brush bar is free from foreign
objects that could cause marking.
28
• Fine dirt such as flour should only be vacuumed in very
small amounts.
• Do not use the robot to pick up sharp hard objects, small
toys, pins, paper clips, etc. They may damage the robot.
EMPTYING THE CLEAR BIN
• Make sure that the clear bin is emptied before each use.
• Empty as soon as the dirt reaches the level of the MAX
mark – do not overfill.
CLEANING THE CLEAR BIN
• Clean the clear bin with cold water only.
• Clean the cyclone shroud with a cloth or dry brush to
remove any lint and dust.
• Ensure the clear bin is completely dry before replacing.
• Do not immerse the cyclones in water or pour water into
the cyclones.
WASHING YOUR FILTERS
• Please refer to the 'Washing and drying the filters' section;
check and wash the filters regularly according to the
instructions to maintain performance.
• The filters may require more frequent washing if vacuuming
fine dust.
LOOKING FOR BLOCKAGES
• Ensure the robot is off the dock before looking for
blockages. Do not operate as this could result in
personal injury.
• Beware of sharp objects when checking for blockages.
• Refit all parts securely before using.
• Clearing blockages is not covered by your guarantee.
• This robot has carbon fibre brushes. Take care if coming
into contact with them, as they may cause minor skin
irritation. Wash your hands after handling the brushes.
SOFTWARE UPGRADES
• To ensure the best performance from your robot please
ensure that the robot's software is regularly upgraded. You
can do this either by registering for automatic upgrades
via the Dyson Link app or by manually downloading an
upgrade via your computer. See 'Software updates' section.
DISABLE WI-FI
• Your robot is automatically set to periodically send out a
wi-fi signal that can be picked up as a local network (also
called 'AP' mode.) If desired this mode can be switched
'OFF' by following the instructions below.
• Download the 'Disable wi-fi' software from the Dyson
website on to a USB stick. Make sure this software is the