Page 1
N300 WiF Range Extender Mode l E X2700 Us e r Manual March 2016 202-11395-03 350 East Plumeria Drive San Jose, CA 95134...
Page 2
Thank you for purchasing this NETGEAR product. You can visit to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Conformity http://kb.netgear.com/app/answers/detail/a_id/11621.
Note: Firmware updates with new features and bug fixes are made available from time to time on downloadcenter.netgear.com. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually.
N300 WiF Range Extender Meet Your Extender Before you install your extender, familiarize yourself with its LEDs, buttons, and port. Front Panel Router Device Link Link Power LED WPS LED Power On/Off button WPS button Factory Reset Ethernet port button Figure 1.
N300 WiF Range Extender Table 1. Front panel LEDs (continued) Description Power • Solid amber. The extender is booting. • Solid green. The extender is powered on. • Off. The extender is powered off. • Solid green. WiFi security is enabled (WPA or WPA2). •...
N300 WiF Range Extender Use the Extender The extender repeats the signals from an existing WiFi router or access point. Place the extender, apply power, and connect it to your WiFi network. Place the Extender and Apply Power To place the extender and apply power: ...
Page 10
N300 WiF Range Extender If the Router Link LED does not light, try again. If it still does not light, see Connect With Web Browser Setup on page 10. Find the new extender network name on your computer or WiFi device. The extender creates two new extended WiFi networks.
Page 11
N300 WiF Range Extender Click the NEW EXTENDER SETUP button. The first time that you log in to the extender, the Create Account page displays. If the Create Account page does not display, visit www.mywifiext.net. Complete the fields and click the NEXT button. Select a WiFi network to extend and click the NEXT button.
Page 12
Complete the registration fields and click the Finish button to complete the setup. If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support. The Status page displays.
N300 WiF Range Extender Connect an Ethernet-Enabled Device After the extender is connected to your existing WiFi network, you can connect a wired device to the extender using an Ethernet cable. The device can then access your existing network through the extender’s WiFi connection. Extender WiFi router Figure 3.
Complete the registration fields and click the FINISH button to complete the setup. If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support. The Status page displays.
Extender Network Settings This chapter covers the following topics: • View Connected Devices • View WiFi Settings • Change the WiFi Network Name • Turn Off the SSID Broadcast to Create a Hidden Network • Disable or Enable the WiFi Radio •...
N300 WiF Range Extender View Connected Devices You can view a list of devices that are connected to the extender network. To view connected devices: On a computer or WiFi device that is connected to the extender network, launch a web browser.
N300 WiF Range Extender Select Settings > WiFi. Change the WiFi Network Name To change the WiFi network name: On a computer or WiFi device that is connected to the extender network, launch a web browser. In the address field of your browser, enter www.mywifiext.net. When prompted, enter your email address and password.
N300 WiF Range Extender Select Settings > WiFi. In the Network Name (SSID) field, type a network name. Click the SAVE button. Your settings are saved. Turn Off the SSID Broadcast to Create a Hidden Network By default, the extender broadcasts its WiFi signal so that its WiFi network name (SSID) is easy for you to find and connect to from your computer, tablet, or smartphone.
N300 WiF Range Extender Select Settings > WiFi. Clear the Broadcast the Network name (SSID) check box. Click the SAVE button. Your settings are saved. Disable or Enable the WiFi Radio By default, the extender’s WiFi radio broadcasts signals in the 2.4 GHz band. If you disable the WiFi radios, then no one can connect with WiFi to the extender.
N300 WiF Range Extender Select Settings > WiFi. Select or clear the Enable 2.4 GHz WiFi check box. Click the SAVE button. Your settings are saved. Change the WiFi Speed To change the WiFi speed: On a computer or WiFi device that is connected to the extender network, launch a web browser.
N300 WiF Range Extender Select Settings > WiFi. In the WiFi Speed menu, select a speed. Click the SAVE button. Your settings are saved. Customize the Extender’s WiFi Coverage Area By default, the extender uses its maximum WiFi coverage area. You can select a smaller coverage area, which uses less electrical power.
N300 WiF Range Extender Select Do More > WiFi Coverage. Select a radio button for the output power. Click the SAVE button. Your settings are saved. Use WPS to Add a Computer to the Extender’s WiFi Network WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s network without entering the WiFi network passphrase or key.
N300 WiF Range Extender In the address field of your browser, enter www.mywifiext.net. When prompted, enter your email address and password. The Status page displays. If your browser displays the Menu icon , click it. The extender menu displays. Select Settings > Do More > Connect Devices (WPS). Leave the Push Button (recommended) radio button selected.
N300 WiF Range Extender The Connect Devices (WPS) page displays. Select the PIN Number radio button. Type the PIN of the WiFi device in the field. Click the NEXT button. For four minutes, the extender attempts to find the computer or WiFi device. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi network.
N300 WiF Range Extender The extender menu displays. Select Settings > Connected Devices. In the WiFi Devices section, select the Enable Access Control check box. The WiFi devices table displays the names and MAC addresses of WiFi devices that are connected to the extender.
N300 WiF Range Extender Select Do More > Access Schedule. Select the Access Schedule On radio button. The page adjusts. In the Days menu and the Time menu, select the days and time when you want to disable Internet access. Click the Add Time button to add the time that you specified to the Scheduled Times table.
N300 WiF Range Extender Scroll down and click the IP Address heading to expand the IP address settings. By default, the Dynamically get IP Address from Router radio button is selected. Select the Use Static IP Address radio button. Complete the fields to specify the IP network IP addresses. Click the SAVE button.
Page 28
N300 WiF Range Extender On the router, add the extender’s virtual MAC address and all the virtual MAC addresses connected to the extender network to your router’s MAC filter table. Enable the router’s MAC filter, WiFi access control, or ACL. Extender Network Settings...
Maintain and Monitor the Extender This chapter covers the following topics: • Change the Extender User Name and Password • Turn Password Protection Off and On • Recover a Forgotten User Name or Password • Automatically Adjust for Daylight Saving Time •...
N300 WiF Range Extender Change the Extender User Name and Password You can change the user name and password to log in to the extender. To add an extender user: On a computer or WiFi device that is connected to the extender network, launch a web browser.
N300 WiF Range Extender Turn Password Protection Off and On We recommend that you leave password protection on to help keep your network secure. You can turn password protection off and on. To turn password protection off or on: On a computer or WiFi device that is connected to the extender network, launch a web browser.
N300 WiF Range Extender A login window opens. Log in to the extender. Automatically Adjust for Daylight Saving Time To set up the extender to automatically adjust for daylight saving time: On a computer or WiFi device that is connected to the extender network, launch a web browser.
N300 WiF Range Extender Back Up and Manage the Extender Configuration When the extender works correctly after initial setup, we recommend that you back up the extender configuration settings. After you back up the settings, if you change the extender configuration settings but are not content with the new settings, you can restore the extender configuration to the backed-up settings.
N300 WiF Range Extender If your browser displays the Menu icon , click it. The extender menu displays. Select Settings > Other Settings. Click the BROWSE button. Locate and select the previously saved backup file. By default, the name of the backup file is NETGEAR_EX2700.cfg. CAUTION: After you click the RESTORE button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender...
Page 35
N300 WiF Range Extender Insert a straightened paper clip into the hole of the Factory Reset button and hold it for about seven seconds. Factory Reset button Release the button. CAUTION: Do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting.
N300 WiF Range Extender Select Settings > Other Settings. CAUTION: After you click the RESET button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting. Click the Factory Reset button.
N300 WiF Range Extender Select Settings > Firmware Update. Click the CHECK ONLINE button. If new firmware is available, follow the onscreen prompts to download it onto your computer. Note: You might need to unzip the firmware file. Click the BROWSE button. Locate and select the new firmware file.
Page 38
N300 WiF Range Extender The Other Settings page displays. Click the RESTART button and click the Yes button to confirm. The extender restarts, which takes about two minutes. Maintain and Monitor the Extender...
FAQs and Troubleshooting This chapter covers the following topics: • FAQs • Cannot Connect to the Extender • Cannot Join a WiFi Network and Receive an Error Message...
N300 WiF Range Extender FAQs This section provides answers for difficulties you might experience with the extender. I forgot my login email address and password. What can I do? In the login window, click the Username & Password Help link to answer the security questions that you set up during the initial setup.
N300 WiF Range Extender Cannot Connect to the Extender If you cannot connect to the extender, determine what prevents you from connecting: • If you forgot your user name or password, click the Username & Password Help link. For more information, see FAQs on page 40.
N300 WiF Range Extender Factory Default Settings The following table includes the factory settings for the extender. You can use the Factory Reset button or the Erase feature to return the extender to these settings. (See Return the Extender to Its Factory Default Settings on page 34.) Table 2.