Table of Contents
Advertisement
Speakers
Description
Speakers (include left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Remove the battery (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Disengage each speaker from the computer by using a tool to pry up near the tabs of each speaker (2).
3.
Remove the tape (3), and then release the speaker cables from the routing clips (4) and channels built
into the base enclosure.
4.
Remove the speakers (5).
Reverse this procedure to install the speakers.
44
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Keyboard/top cover on page
Battery on page
42).
Spare part number
787723-001
23).
Hide quick links:
Advertisement
Table of Contents
