Table of Contents
Advertisement
Heat sink
Description
Heat sink (includes alcohol pad, thermal tape, and thermal grease)
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
Remove the heat sink:
1.
Remove the two Phillips PM2.0×2.0 screws (1) that secure the heat sink to the system board.
Keyboard/top cover on page
Battery on page
Spare part number
830871-001
23).
42).
Component replacement procedures
33
Hide quick links:
Advertisement
Table of Contents
