Table of Contents
Advertisement
Reconnecting the Smart Touch Control
If the Smart Touch Control stops operating or works abnormally, replace the battery as this may
PAIRING
be caused by insufficient battery power. If the problem persists, press the
button on the
PAIRING
Smart Touch Control to restore pairing with the TV. The
button cannot be accessed without
removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the
PAIRING
Smart Touch Control to the TV receiver and press the
button. When pairing is complete, the
pairing image displays at the bottom left of the TV screen.
<The Smart Touch Control pairing button>
Battery Low Alarm
If the battery becomes and blanks low while using the Smart Touch Control, the following alarm
window blinks and appears at the bottom left of the screen. If the alarm window pops up, replace the
batteries of the Smart Touch Control. Use alkaline batteries for longer usage.
<Low battery alarm window>
Advertisement
Table of Contents
