Hard Drive - HP 17-x Series Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive cover.
Description
2-TB, 5400-rpm, 2.5-inch
1-TB, 5400-rpm, 2.5-inch, hybrid 8 GB SSD
1-TB, 5400-rpm, 2.5-in
500-GB, 5400-rpm, 2.5 inch
Hard drive cover
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the hard drive:
1. Remove the USB board cable from atop the hard drive as follows:
a. Lift the ZIF connector (1), and then disconnect the cable from the system board (2).
b. Lift the ZIF connector (3), and then disconnect the cable from the USB board (4).
c. Remove the USB board cable from atop the hard drive (5).
Battery on page 32).
Optical drive on page
Bottom cover on page
33).
39).
Component replacement procedures
Spare part number
801808-005
731999-005
778192-005
778188-005
856584-001
41