Bottom Cover - HP 17-x Series Maintenance And Service Manual

Bottom cover

Description
Bottom cover
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
To remove the bottom cover:
1. Position the computer upside down with the front toward you.
2. Remove the two rubber feet (1).
3. Remove the service label screw cutouts from above the two screws under the label (2).
NOTE:
sign
Do not remove the regulatory label – only remove or punch holes through the circular cutouts above the
screws.
Battery on page
Optical drive on page
Two screws that are located under the regulatory label are marked with a dashed circle and "+"
.
32).
33).
Component replacement procedures
Spare part number
856601-001
39