HP 17-P series Maintenance And Service Manual page 48

10. On select models, removing the panel also requires disengaging the panel from the back cover latch. To
disconnect the display panel, carefully rotate the display panel (1) to open it. Push upward on the
connection latch (2)panel and then disengage the panel from the back cover (3).
11. If it is necessary to replace the webcamera/microphone perform the following: Lift the module (1) from
the adhesive holding it in place on the display bezel and disconnect the module connector (2) if you
have not already done so when removing the display cable.
12. If it is necessary to replace the WLAN antenna cable, follow these procedures:
a. Position the display back cover face up.
40 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts