Table of Contents
Advertisement
Extend: View the screen image extended across both the computer and the external
●
device.
Second screen only: View the screen image on the external device only.
●
Each time you press f4, the display state changes.
NOTE:
resolution of the external device, as follows. From the Start screen, type control panel, and
then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust
screen resolution.
Setting up HDMI audio
HDMI is the only video interface that supports high-definition video and audio. After you connect an
HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1.
From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then select Playback devices.
2.
On the Playback tab, select the name of the digital output device.
3.
Click Set Default, and then click OK.
To return the audio stream to the computer speakers:
1.
From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then click Playback devices.
2.
On the Playback tab, click Speakers.
3.
Click Set Default, and then click OK.
Discovering and connecting to Miracast-compatible wireless displays (select
models only)
To discover and connect to Miracast-compatible wireless displays without leaving your current apps,
follow the steps below.
To open Miracast:
Point to the upper-right or lower-right corner of the Windows desktop or Start screen to display
▲
the charms, click Devices, click Project, and then follow the on-screen instructions.
– or –
On select computer models, from the Start screen, click the HP Quick Access to Miracast icon,
and then follow the on-screen instructions.
26
Chapter 4 Enjoying entertainment features
For best results, especially if you choose the "Extend" option, adjust the screen
Advertisement
Table of Contents
