About The Samsung Smart Control - Samsung 9 SERIES User Manual

Installing batteries into the remote control (Battery size:
AAA)
Match the polarities of the batteries to the symbols on the battery compartment.
- The colour and shape of the remote may vary depending on the model.
- Use the remote control within 7 m of the TV.
- Bright lights may affect the performance of the remote control. Avoid using the remote control
near special fluorescent lights or neon signs.
1. Gently pull on the battery cover's notch and then remove the cover completely once it comes
loose.
2. Insert 2 AAA alkaline batteries, making sure to align the positive and negative polarities
correctly.
3. Place the battery cover on the remote control and insert the cover into the remote control.
4. Slide the battery cover in the order shown so that the cover is completely attached to the
remote control.
Installing batteries into the Samsung Smart Control
To use the Samsung Smart Control, push
the rear cover open in the direction of the
arrow and insert the batteries as shown in
the figure. Make sure that the positive and
negative ends are facing the correct direction.
- Alkaline batteries are recommended for
longer battery life.

About the Samsung Smart Control

When you start the TV for the first time by pressing the P (Power) button on the Samsung Smart
Control, the TV automatically pairs with the Samsung Smart Control. Once the TV and Samsung
Smart Control have paired, you can use the Samsung Smart Control to operate the TV.
- We recommend using Samsung Smart Control at a distance of less than 6m. A usable distance
may differ depending on the wireless environmental conditions.
English - 16