Table of Contents
Advertisement
c.
Remove the display bezel (4).
NOTE:
connected in this procedure.
2.
To remove the webcam/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Lift to disengage the adhesive that secures the webcam/microphone module to the display, and
then remove the module (1) enough to disconnect the cable.
c.
Disconnect the cable (2) from the module.
3.
To remove the display panel:
a.
Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the enclosure.
60
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
The following image shows the display panel connected to the computer. It will not be
Hide quick links:
Advertisement
Table of Contents
