HP 340 G3 Maintenance And Service Manual page 62

4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the hard drive (see
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
WLAN module (see
●
● Memory module (see
● Solid-state drive (see
To remove the system board:
1. Disconnect the display cable from the system board (1).
2. Remove the cable from under the tape and clips along its routing path (2).
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 26).
Optical drive on page
Bottom cover on page
Hard drive on page
WLAN module on page 39)
Memory module on page
Solid-state drive (M.2) on page
27), if installed.
34).
36).
41)
38)