Hard Drive - HP 340 G3 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket.
Description
1-TB, 7200-rpm, 9.5 mm
500-GB, 7200-rpm, 7 mm
500-GB, 5400-rpm, hybrid, 7-mm
Hard Drive Hardware Kit (includes bracket and cable)
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the hard drive:
1. Disconnect the hard drive cable from the system board (1).
2. Lift the hard drive assembly from the computer (2).
3. To disassemble the hard drive, pull the connector away from the drive to remove it (1).
36 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 26).
Optical drive on page
Bottom cover on page
27), if installed.
34).
Spare part number
766644-001
703267-001
732000-001
813510-001