Special Functions; Domestic Hot Water Timer (Tm San); Holiday Programme (Holidy); Backlit Display (Disply) - Immergas SUPER CAR Instruction And Warning Book

Table of Contents

Advertisement

10.

SPECIAL FUNCTIONS

The
push button is used to access a menu for customising
Super CAR to suit your specific needs.
Turn the selector to scroll the list of functions and press it to
select the function wanted.

10.1 Domestic hot water timer (TM SAN).

This is used to set the temperature of the domestic hot water
in the storage tank at two distinct levels (comfort and reduced)
or to define the daily interval for turning the Aqua Celeris
on. You gain access to the "TM SAN" function by pressing
the selector and setting it on "YES". Now you have to set
the turning on and off times for the "d.h.w. comfort" tem-
perature. During the turning off period, the domestic water
temperature will be set on the minimum value allowed. The
. icon stays on all the time the d.h.w. temperature is in the
comfort mode. During the setting phase the ON and OFF
comfort temperature time appears on the display as well as the
adjustment bar showing the comfort period you are setting
(
).
Note: for instant boilers, start the function only for models
with evolved electronics, type Superior kW.

10.2 Holiday programme (HOLIDY).

A number of days can be defined (from 1 to 99) during
which the system deactivates both the central heating and the
domestic hot water functions.
The value decreases at midnight with the change of day. At
the end of the days set (the counter reaches 0) all functions
that were on previously are turned back on. The flashing
icon means the holiday function is working.
If this function is activated remotely by the Telephone control,
the boiler is started with the settings given over the phone
stopping the Holiday programme.
Note: the room antifreeze function is always guaranteed even
in the holiday mode.

10.3 Backlit display (DISPLY).

By pressing the parameter selector you can see the backlit dis-
play state (ILLUMN) and choose the information to see in the
alphanumerical string (STRING). From these two parameters
you have the following options to choose from:
ILLUMN:
- always on (ON);
- on when setting and using the Super CAR, the display stays
illuminated for 10 seconds (standard setting) (TMR).
23

Advertisement

Table of Contents
loading

Table of Contents