Table of Contents
Advertisement
6.6
Energy saving function.
It is possible to define a number of hours (from 1 to 99) during
which the system works in the energy saving mode.
In this energy saving mode the boiler carries on working to
maintain the reduced room temperature set on Super CAR.
To gain access to the function press the parameter selector to
see the room temperature setting and while it is being displayed
press the
, push button and choose the number of hours
you want to keep the system in the energy saving mode via
the selector. It is reduced every hour. At the end of the hours
set (the counter reaches 0) the functions that were ongoing
before are restored. The
saving function is working.
18
Fig. 16
icon flashes when the energy
Note: the antifreeze function is guaranteed also in the energy
saving mode.
If you turn the selector during the function you gain access
to the function counter and not to the room temperature
setting.
6.7
Working in the winter mode with the external
temperature probe.
If an external temperature probe is installed you will be able to
set a delivery temperature correction curve in relation to the
outside temperature. To do this please see the starting proce-
dures explained in the special functions chapter. In this case
when you press the
push button the delivery temperature
is shown, calculated in relation to the outside temperature
which can be modified by turning the parameter selector.
Note: the temperature calculated is visually displayed only if
there is a heating request, hence with the symbol
addition, with the room probe on the temperature calculated
depends on the room temperature set. If you wish to limit the
delivery temperature further still, you have to do so via the
"MAX HEAT" parameter in the "Adjustments" menu (Special
Functions chapter).
on. In
Advertisement
Table of Contents
