Page 1
SUPER CAR Remote control Instructions and warning book...
Page 2
Immergas high quality products that will guarantee your wellbeing and safety for a very long time to come. As an Immergas Customer you know you can always rely on a qualified Authorised Assistance Service, qualified and updated to guarantee that your “Remote Control”...
7. PROGRAMMING THE SUPER CAR ....19 CONTENTS 7.1 Setting the comfort and reduced room temperatu- Page re................19 HOW TO USE THE INSTRUCTION BOOKLET ..4 7.2 Programming working hours......20 FOREWORD ..............4 8. WEATHER FORECASTS ........21 GENERAL RECOMMENDATIONS ......4 9.
• Do not expose the Super CAR to sources of heat or under CLEANING THE OUTSIDE OF THE REMOTE a hot sun when using it. Use a cloth dampened with a mild soap to clean the outside of • The manufacturer is not held in anyway responsible in the the Super CAR.
Super CAR, including its wires and connections to the boiler, must be installed by specialized personnel. When the boiler is initially checked, free of charge, when the Super CAR is installed in the system, the Immergas authorised assistance centre will check its connection to the boiler’s terminal block and see that it is working properly.
Page 7
2) Install the Super CAR directly on the wall using the holes drilled at the back of it (Fig. 1) or in a recessed box using the screws supplied with it. 3) Do not do the wiring when the boiler powered (Fig. 4).
Page 8
BOILER Super CAR External probe (Optional) Fig. 4 Telephone control Telephone (Optional) control connection (Optional) Power lead Fig. 5...
Winter, Summer push button, Off DESCRIPTION OF THE DISPLAY Boiler malfunctions reset push button winter - the domestic hot water heating and central heating functions are enabled Push button to set the time and day summer - only the domestic hot water heating function Push button to set Comfort and reduced room tem- is enabled perature...
Note: Some of the icons can have different meanings de- pending on the context; see the following paragraphs to see which functions are turned on when several icons are present visual display of room temperature simultaneously. and numerical data visual display of the STARTING weather forecast Programming the current time and day.
Selecting the mode. • Working in the summer mode. By pressing the push Depending on the mode selected, Super CAR carries out the button you go to the summer mode ( ) the Super CAR user’s request, displaying the results.
Page 13
( ) the CAR enables the production of domestic hot water as well as central heating (see fig. 10). In the winter Super CAR can work automatically or manually - see Chapter 6 for the description.
If you turn the parameter selector while it is being displayed you change the temperature which is stored by pressing the selector. If the Super CAR is in the “summer” mode, by pressing or turning the parameter selector you gain direct access to the domestic hot water temperature setting window.
WINTER MODE FUNCTIONS The heating of domestic hot water and central heating are both enabled when the Super CAR is in the winter mode ( ).You can select two main operating modes: automatic or manual plus a forced automatic timed programme.
Super CAR is factory set with a standard programme shown Working automatically. Super CAR enables automatic operation where an hourly in the following table. If this is different from what you need programme controls room temperature during the hours it can be changed as described in the following chapter.
During normal operation, boiler delivery temperature is automatically controlled by Super CAR based on the room temperature set which means the boiler does not work at the maximum temperature set but does, instead, work at a...
In this energy saving mode the boiler carries on working to which can be modified by turning the parameter selector. maintain the reduced room temperature set on Super CAR. To gain access to the function press the parameter selector to...
PROGRAMMING THE SUPER CAR By programming the Super CAR you can set/modify the following parameters: - the comfort and reduced temperature levels; - hourly, daily and weekly operating programme. Setting the comfort and reduced room temperature. Fig. 17 Press the push button to access room temperature pro- gramming (fig.
Once you have selected the day or group of days by pressing Programming working hours. You enter the programming window by pressing the the selector, set the first working period with the comfort push button. temperature (ON 1) indicated by the word “ON” at the top By following the steps described below you will be able to right and “Phase 1”...
The meanings of the error codes differ according to the boiler Attention: the weather forecast is approximate; Immergas the Super CAR is connected to so please read the boiler’s does not hold itself responsible for an erroneous forecast. In instruction manual where you will find a complete list of the addition, forecasts can only be reliable following a front that error codes and their meanings.
By means of the general resetting hole (fig. 7 page 8) it is pos- Error in reading room temperature or value sible to reset the Super CAR hardware without losing your ERR>TP measured off scale (below 0°C or above 50°C) settings (the hour, date and hourly programme).
ILLUMN: - always on (ON); Note: for instant boilers, start the function only for models - on when setting and using the Super CAR, the display stays with evolved electronics, type Superior kW. illuminated for 10 seconds (standard setting) (TMR).
(CIC). 10.4 Adjustment parameter management (REGULT). By pressing the parameter selector you can see the parameters for adjusting Super CAR operation: - Adjustment constant (OFFSET), constant adjustable from -15°C to +15°C which, when the external probe is installed (optional), changes the standard setting of the delivery temperature (0°C) (see fig.
Page 25
ON is the standard setting. This system’s reaction speed depending on the type of system. function allows the Super CAR to adapt the adjustment of For example: the speed at which room temperature, delivery temperature, etc., is reached, adapting itself to the room in which it is...
11.1 Room probe (AMB ON). tained constant until the desired room temperature is reached. Used to turn the room probe in the Super CAR on or off. (Setting to be done on systems with zone board). Depending on the parameter setting, it will be possible to...
The parameters that can be displayed 11.4 Telephone control (REMOTE). are listed below: It lets you set Super CAR operation so that if it is started - T EXT: outside temperature (if the optional external tem- remotely it works with the automatic hourly programme if perature probe is installed).
• NTC room temperature sensor: ........................50 k a 25°C • Clock deviation ..........................+/- 15 minutes/year * = the indication of the room temperature can be influenced by where the Super CAR is installed (for instance on a warm wall, cold wall, height from the floor, etc.).
13.1 Product specifications. In accordance with Regulation 811/2013 the temperature control device class is: Contribution to the environmental Class Description heating seasonal energy efficiency Super Remote Control Super Remote Control coupled to outer sensor...
FACTORY SETTINGS • Operating status ..............................Stand-by • Operating programme ............................Manual • Comfort temperature ............................20.0°C • Reduced temperature ............................16.0°C • Room temperature on manual ..........................20.0°C • Antifreeze ................................5.0°C • D.h.w. set point ..............................50.0°C • Max C.H. limit permitted in the boiler ........................ MaxRis •...
Page 32
Follow us Immergas Italia immergas.com Immergas S.p.A. 42041 Brescello (RE) - Italy Tel. 0522.689011 Fax 0522.680617 Certified company ISO 9001...