NETGEAR WPNT834 Reference Manual page 64

Table 6-1. Wireless Router Status Fields
Field
Wireless Port
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Click on the Connection Status button to display the connection status, as shown below.
Figure 6-2
This screen shows the following statistics:.
Table 6-2: Connection Status Items
Item Description
IP Address The WAN (Internet) IP Address assigned to the router.
Subnet Mask The WAN (Internet) Subnet Mask assigned to the router.
Maintenance
Reference Manual for the RangeMax 240 Wireless Router WPNT834
Description
These parameters apply to the Wireless port of the router.
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR.
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Identifies the channel of the wireless port being used. See
Communications" in Appendix B
channel.
Indicates the router communication mode: 802.11g and 802.11b,
802.11g only, 802.11b only, Up To 126 Mbps, or Up To 240 Mbps.
Indicates if the Router Radio feature of the Router is enabled. If not
enabled, the Wireless LED on the front panel will be off.
Indicates if the router is broadcasting its SSID
v1.0, November 2005
for the frequencies used on each
"Wireless
6-3