Default Configuration Settings; Set Password - NETGEAR RangeMax WiFi Range Extender WPN824EXT- User Manual

• Erase. Sometimes you might want to restore the extender to original default settings. You can
do so by using the Erase function, which restores all factory settings. After an erase, the
extender's user name is admin, the password is password, the LAN IP address is
192.168.1.250, and the extender's DHCP server is enabled.
To erase the configuration, click the Erase button.
Note: To restore the factory default configuration settings when you do not know the
login password or IP address, you must use the restore factory settings button
on the rear panel of the extender. See
Password" on page A-4

Set Password

The Set Password screen allows you to change the default password for the WiFi range extender,
password, to a more secure password. (For more information about logging in and the default
settings, see "Logging In" on page 1-5
page A-4.)
Select Set Password under Maintenance in the main menu. The Set Password screen displays.
Figure 3-7
Setup and Maintenance
RangeMax WiFi Range Extender WPN824EXT User Manual
"Restoring the Default User Name and
and "Restoring the Default User Name and Password" on
v1.0, April 2008
3-9