OPERATING MANUAL ASSEMBLY Remote control docks magnetically. click Align the black arrows. Then twist clockwise until it clicks and locks. REGISTER YOUR FREE 2 YEAR GUARANTEE TODAY...
Page 2
If you have any questions about your Dyson appliance, call the Dyson Helpline with your serial number and details of where/when you bought the appliance. Most questions can be solved over the phone by one of our trained Dyson Helpline staff.
To avoid a tripping hazard arrange the cable away from traffic areas so that it will not be tripped over. Do not use with a damaged cable or plug. If the supply cable is damaged it must be replaced by Dyson or its service agent or similarly qualified persons in order to avoid a hazard.
Controls 1. Power on 2. Thermostat control Each time the heating mode is selected, it conducts a short calibration cycle. Airflow will be automatically controlled during this cycle. Once the calibration cycle is complete, it will revert to the selected airflow speed.
Page 5
3. Airflow speed control 4. Oscillation control To change the airflow speed press the airflow speed To start the heater oscillating, press the oscillation control button. The digital display will show the new control button. To stop the heater oscillating, press it speed;...
Clearing blockages Cleaning Ensure the heater is unplugged and has been allowed Unplug from the mains electricity supply. Allow to cool for to cool. Look for blockages in the air inlet holes and 1 to 2 hours before cleaning if the heater has been in use. in the small aperture inside the air loop amplifier.
• Unplug from the mains electricity supply. • Blockages – please refer to the Dyson Operating Manual for details of how to • Allow to cool for 1 to 2 hours before cleaning if the heater has been in use.
Telephone Mobile As a Dyson appliance owner, you can hear about We sometimes ask other companies (such as market researchers) to Dyson inventions, services and products before anyone contact owners on our behalf. We do this to get feedback on ideas or else.