Removal and Replacement
1. Disconnect power.
2. Open the oven door and remove 2 screws
holding the latch motor from the latch trim.
3. Raise the cooktop panel.
4. Pull the latch motor assembly from under the
top panel.
Latch Motor
Assembly
Top Panel
5. The top panel is held in place by 6 screws.
Remove the screws then remove the top
panel.
Top Panel
6. Label and disconnect the 6 terminal lugs and
remove the latch motor assembly.
6 Terminal Lugs
Latch Trim
Oven Switch
The oven switch is located on the front oven
frame, between the top enclosure and the oven
liner. The oven switch is accessible by lifting the
front of the cooktop.
The oven switch provides a closed or open signal
to the motorized door lock, oven light, and
convection fan motor.
Connector
– 19 –
Latch Motor
Assembly
2 Switch Tabs
Switch