Setting The Alarm Clock Function - Accu-Chek Aviva Owner's Booklet

TIME / DATE
(hrs, min, day,
month, year)

Setting the Alarm Clock Function

The alarm clock function is a handy way to remind you to test. You can set 0 to 4 alarms per day.
The meter beeps every two minutes—up to three times. You can turn the alarm off by inserting a
test strip or pressing any button. You must have the beeper set to "On" for the alarm to sound.
Your meter is preset with the alarm clock function set to "OFF." You must turn it "On" to use this
feature.
If you turn A-1, A-2, A-3, and A-4 on, your meter is preset with the following times for your
convenience. You can adjust the times to suit your needs.
A-1 8:00
Notes:
• If you tested within 30 minutes of an alarm, the alarm does not occur.
• If the meter is on at the alarm time, the alarm does not occur.
• Exposure to cold conditions may disable alarms until the meter is turned on.
Chapter 3
BEEPER
(on/off)
A-2 12:00
You are here
ALARM CLOCK
(A-1, A-2, A-3, A-4)
A-3 18:00
34
HYPO ALARM
(off, on, level)
A-4 22:00