SETUP / BATTERIES
Replacing / Inserting Batteries
1. If applicable, unplug the AC adapter from the power source.
2. Remove the battery cover on the side of the display assembly by unscrewing the (2)
battery cover screws (see Figure 3).
3. Replace or install the (6) AA batteries with new units. Follow the correct orientation
of battery placement.
®
4. Health o meter
Professional recommends using an alkaline or lithium battery, rated
for 130° F (54° C) operation. Do not use Zinc-Carbon batteries. Always replace all six
batteries at the same time.
5. Re-attach the battery cover to the display assembly.
Warning: If the scale will not be used for some time, remove the batteries to avoid
a safety hazard. Disposal of batteries must be performed in accordance with the
prevailing national, regional or local regulations which apply to you.
Figure 3
8